Click image to view full size image
Description:
Injection molding machine1.Big tie bar space and shot weight capacity
2.Most famous component parts
3.Perfect after-servi
single sliding plate plasticforming machine
Name of item | UNIT | A | B | C | |
Theoretical shot volume | Cm3 | 1965 | 2218 | 2490 | |
Actual shot volume | g | 1770 | 2000 | 2240 | |
Oz | 62.5 | 70.7 | 79.2 | ||
Screw Diameter | Mm | 80 | 85 | 90 | |
Injection pressure | Mpa | 168 | 149 | 133 | |
Injection rate | g/s | 480 | 508 | 590 | |
Screw Stepless | r/min | 0-150 | |||
Clamping Force | KN | 5000 | |||
Opening Stroke | Mm | 750 | |||
Space Between tie Bars | mm×mm | 800×710 | |||
Mould Thickness | mm | 350-720 | |||
Ejector Stroke | Mm | 170 | |||
Ejector Force | KN | 151 | |||
System pressure | Mpa | 16 | |||
Pump motor | KW | 45 | |||
Heating capacity | kw | 34 | |||
Machine size(LXWXH) | m×m×m | 8×2.1×2.7 | |||
Machine weight | Ton | 20 | |||
Spare parts:
Nozzles | Toolbox: | Heating Ring:3pcs | Block: | Grease:1 barrel |
Filter: | Limit Switch: | Hexagon Wrench:1sets | Thermocouple:3pcs | Seal Ring: |
40T-60T silicone machine
